ADS-B RF Component Mount

LNA Enclosure: I designed this to hold a NooElec LaNA LNA just below the antenna in the feedline. I used a 12 inch piece of coax to adapt the N-type connector of the antenna to the SMA of the LNA. I used some adhesive lined shrink tube to seal the enclosure to the coax. The bottom of the enclosure nests inside the top the shed water.

Raspberry Pi mount. This holds a raspberry pi 3b, Yahboom PD Power Expansion Board , and PoE Texas passive PoE injector . The PoE injector sits below the ethernet/USB ports of the rPi.

RF Component Mount : Holds a NooElec NESDR Smart, FlightAware ADS-B filter, and a GPIO Labs Bias-t injector.