Macbook stand - universal size

A simple macbook stand printed in one day. Universal size for most laptops on the market.

Very simple printing. I recommend printing the middle with a resolution of 0.15mm, L and R at 0.20mm.

For supports, see gcode (supports are very easy to separate).

Center for notebooks up to a thickness of about 14-22mm print file S.stl. For thicker laptops than approx. 22 mm, print the S_22mm+.stl file. For thinner laptops than approx. 14 mm, print the S_ultraslim.stl.

All centers can be easily extended to the desired width.

As protection, it is best to use the following ikea pads:

https://www.ikea.com/cz/cs/p/fixa-sada-sam-chranicu-na-podlahu-20-ks-seda-00431151/