KTM 790/890 Adventure - Husqvarna 901 Throttle Tube

Wanna fit whatever grip you like on your KTM 790/890 and Husqvarna 901?

KTM will not sell you just the throttle tube, aftermarket CNC tubes cost 80-100 Euros.

So I made my own!

Key advantages of this product:

- Enables installation of any aftermarket grips of your choice . Heated grips are supported up to 194°C

- Designed for carbon-fiber-reinforced nylon for superior durability and reliability

- Precisely engineered to eliminate throttle play in the stock design

- Rough surface and added ridges greatly increase friction making impossible for grips to rotate independently of the tube

I used PAHT-CF (Carbon Fiber reinforced Nylon). I don't suggest using PLA or PETG or other basic materials: strength and long-term durability, especially when exposed to the environment is something to consider.

But you can try other CF filaments, let me know your results with other materials!

You can also buy the printed version: https://www.ebay.it/itm/287072422804

Fits:

- KTM 790 Adventure (2019-2026)

- KTM 790 Adventure R (2019-2026)

- KTM 790 Duke (2018-2022)

- KTM 790 Duke L (2018-2022)

- KTM 890 Adventure (2020-2024)

- KTM 890 Adventure R (2021-2026)

- KTM 890 Adventure R Rally (2022-2024)

- KTM 890 Duke (2021-2022)

- KTM 890 Duke GP (2022-2023)

- KTM 890 Duke R (2020-2022)

- KTM 890 SMT (2022-2023)

- KTM 990 Duke (2024)

- KTM 1290 Super Adventure R (2017-2024)

- KTM 1290 Super Adventure S (2017-2024)

- KTM 1290 Super Duke R (2017-2022)

- KTM 1290 Super Duke RR (2021-2023)

- KTM 1390 Super Adventure R (2026)

- KTM 1390 Super Adventure S (2026)

- KTM 1390 Super Duke R (2024-2025)

- KTM 1390 Super Duke R EVO (2024-2026)

- KTM RC 8C (2022)

- Husqvarna Norden 901 (2023-2024)

Print settings suggestions:

- Layer Height = 0.2mm

- Wall Generator = Arachne

- Wall loops = 4

- Top surface pattern = concentric

- Infill Density = 30%