BTT TFT35-SPI V2.1 Pivoting Display Mount for E3NG

Important: Still learning and practicing with CAD/Design. So lower the bar on expectations.

I was in search of a way to add a display (BTT TFT35-SPI) to the front of my E3NG, while using the fantastic Flat Mesh Skirt with Wide Legs mod. However I also have my E3NG enclosed, and thus the display would be in the way of the door closing/opening. I was not able to find a Cinderella glass slipper to solve my issue. All other options for a static mount did not give me enough space, I concluded either no one had my specific combo or I had overcomplicated my search. So I started my process with BTT TFT35-SPI V2.1 Pivoting Display Mount, as it would allow me to at least tilt the display out of the way. The original mounting did not align with the skirt mod, I used the remix- Pivoting Display Mount for The 100 as a base as it was already slimmed down and just required minor changes.

The assembly process will still be the same from the original- Pivoting Display Mount. I would recommend the use of socket head screw or flat head screw for attaching the mount to the display mount from the skirt mod. Due to my newbie skill, and need for a quick not so pretty solution- one of the holes is right on the hinge portion. The countersunk portion is at max, and thus clearances could become an issue if the head of the screw extends out it could possibly limit the tilt or cause issues for ribbon cable routing. I used a FHCS and have had no issues.

I will revisit this again to redo the spacing and polish, but for now it functions.

Giving thanks and full credit to all creators! You will need the following for the complete project

minus the mount base -

My remix is made to attach to the "screenmount_base_x1"