2.5" SATA HDD Hard Drive Disk Holder/Mount

This mount is designed to be fixed to any vertical surface and hold a 2.5" SATA HDD. It provides two mounting holes for screws. I also designed it with ventilation in mind to keep the hard drive cool and prevent it from overheating.

There are now two different versions available to fit SATA HHDs of both 9.5 mm and 15 mm thickness.

I use it to hide the hard disk I store my Wii U games on behind my TV cabinet. However, I believe there are plenty more use cases where this model could come in handy.

Print Instructions

- Printed in PLA, but any rigid filament should do

- 2 wall loops

- 0.5 mm line width for both inner and outer walls to minimize the gap infill needed

- 5% gyroid sparse infill is what I used

- Supports aren't needed

Model History

Date

Comment

17-02-2026

Original release for drives with a thickness of 9 mm

07-08-2026

Added an additional model for drives with a thickness of 15 mm