Sunny Sky Fidget | Clicky and Roller Ball Fidget Toy

Here's a sunny little fidget toy that fits right in your palm. It includes a clicky fidget in the sun and three different rolling balls in the cloud part. The latter is print-in-place, but for the clicky part you will need a keyboard switch. I used Kailh, it snaps right in!

Print:

- The model files are seperated by colors, so no AMS / CFS etc. is needed.

- I suggest using supports. The cloud part should not be angled differently, since it might interfere with the rolling ball function.

- Use ironing for smooth finish

- I printed mine with 30% infill to give it a bit more weight. Play around with that setting to your liking.

Assembly:

- Clip off the little rods at the bottom of your keyboard switch - they block the snap fit.

- Press the switch into the cutout of the sun part. You should hear a snapping noise.

- Press the sun cap onto the switch. Add a drop of glue for extra adhesion if necessary, but make sure it doesnt block the switch.

- Plug the sun into the cloud.

- Push the cloud balls around a little bit to loosen them up.

- Click and roll away and enjoy your new sunny sky fidget!

Please note: This is mostly meant as a fidget toy for people old enough to not nibble on the small parts. If you give this to younger children, please make sure all parts are super snug and keep the kid supervised while playing. I also suggest looking into food safety of your filament.

I used HLModtechs Clicky Keychain Template to incorporate the right cutout for the Keyboard Switch (CC BY-SA 3.0 ) - thank you for providing this model! Do check out his content for helpful models and tutorials on Tinkercad.

Looking forward to seeing your prints!

If you like Fidget toys, check out my Fidget World series: