Adjustable Pet Bowl Riser

Pet Bowl Riser

Story in a nutshell:

Our ginger cat lost almost all of his teeth due to an autoimmune reaction.

We use Ikea OFTAST Bowl (15cm) for pets, as it is extremely durable hardened glass (can survive high drops - tested) and extremely cheap.

For the cat it's hard to pick up the food if the Bawl is slipping, so I've decided to design and print a bawl riser to him:

- with anti-slipping feet

- adjustable height (find the best height for comfortable eating)

- compatible with our beloved Ikea bowls.

*Photo with the cat is with an older, more fragile riser version.

Features:

All the components can be printed without support. (Tested with PLA)

IKEA OFTAST 15 cm bowl compatible

Without feet (5 mm holes on bottom part to fit M4 thread) -> Look for "M4 machine feet" or design your own from TPU and M4 screw.

Low amount of material needed

Suggested printing options in Cura for no support:

Support

-> Generate Support: [ ] (disabled)

Experimental

-> Make overhang printable: [✓]

-> Maximum Model Angle: 80°

Suggested infill: 30%

Suggested Build Plate adhesion: Brim (6 mm)