Nieder-Eschbach, Germany - 3D Miniature

3D printable topographic miniature of Nieder-Eschbach - 🇩🇪 Germany

Capture the beauty of Nieder-Eschbach 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 50.201, 8.671 (LatLng) .

It is scaled down from a geographic area of around 2.405 km x 2.398 km to a 3D printable miniature in the dimensions of 200.0 mm x 200.0 mm . The scale from the geographic area (5.768 sq km) to the miniature is approximately ~12026:1 .

The terrain is modeled from geographic data for realistic terrain representation. Ideal for educational purposes, architectural visualization, or as a decorative piece.

Also don't miss out on the other miniatures. Find them in my miniature collection .

Explore all available miniature locations on the interactive miniature map .

Included Frames:

- Dimensions of 208.20 x 208.20 x 10.99 mm, no text engraving with hanging holes

- Dimensions of 220.20 x 220.20 x 10.99 mm, no text engraving with hanging holes

- Dimensions of 220.20 x 220.20 x 11.49 mm, text Engraving "Nieder-Eschbach" with hanging holes

- Dimensions of 220.20 x 220.20 x 11.49 mm, text Engraving "Frankfurt" with hanging holes

- Dimensions of 220.20 x 220.20 x 11.49 mm, text Engraving "Frankfurt am Main" with hanging holes

What's Included:

- STL files for the miniature and all frame variants

- Generic 3MF containing all STLs for easy import into any slicer

- Bambu Studio 3MF with optimized print profiles for A, P, X, and H-Series printers (pre-colorized)

- Snapmaker Orca 3MF with optimized print profiles for the Snapmaker U1 (pre-colorized)

Recommended Print Settings:

- The included 3MF files contain two highly specialized print profiles: "miniature-classic" and "miniature-arachne". For optimal results, use "miniature-arachne" (note: expect long slicing times).

- Due to the nature of geographic terrain data, models may contain non-manifold geometry or areas that require support material. This cannot be avoided. Our included print profiles handle these cases well.

- For printers from other manufacturers or other slicers, check our Miniature Printing Guide for recommended settings (especially support settings).

Assembly:

- Gently put the miniature into the frame. Depending on your printer's calibration, that should be enough to hold the miniature.

- If in doubt, use some super glue. For PLA, I use this glue* (thick variant). I experienced best results with glue that contains Ethyl-2-cyanacrylat.

- Hanging Holes: My frames always have a hole pattern divisible by 10 mm - for this miniature's size the "Hanging Hole Distance" results in 80 mm between holes.

Contains information from OpenStreetMap, which is made available here under the Open Database License (ODbL) .

*affiliate link: This post contains affiliate links. I earn from qualifying purchases at no extra cost to you.