Hueforge Mercedes 190E Evo 2

if you like my hueforges please subscribe to youtube.com/@3dmetehan

Project: mercedes 190e evo 2.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x133.33mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm

#080a0d PLA PolyLite Black Transmission Distance: 0.3

#0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2

#e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 3.5

#e2dedb PLA PolyLite White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Cobalt Blue

At layer #9 (0.8mm) swap to Beige

At layer #18 (1.52mm) swap to White for the rest.