Ground Peg for 20 mm PVC Pipe

Ground Peg for 20 mm PVC Pipe

A simple U-shaped stake for fastening 20 mm PVC pipe to the ground. Position the pipe, push the peg down over it, and it holds the pipe in place.

The two legs taper to a point so they drive into soil easily, and the angled barbs along the outside of each leg resist pull-out — once it's in, it stays in.

Handy in the garden for pinning down irrigation and drip lines, anchoring the feet of hoop tunnels and low frames, holding bed edging, or staking out any temporary PVC structure.

Specs

- Overall: 34.4 × 73.2 mm, 5 mm thick

- Inner gap: 21 mm, a snug fit on 20 mm PVC pipe

PS: I used it to hold my homemade tinywhoop gates on the garden