Magnetic Fridge Hook for Towels - Parametric

I made this hook because I wanted to hang a kitchen towel on my new fridge, but I didn't want to use glue or tape.

The magnets are hidden completely inside the plastic, so there is 0.8mm of material between the magnet and the wall. It will not scratch your fridge.

I included the OpenSCAD file so you can change all the sizes and magnet settings yourself. The model is written in such a way that it will evenly space the magnets. If you choose one magnet, it will be placed center in the model automatically.

If you just want to print right away, I added some ready .3mf files:

- 10mm and 12mm radius: has space for 3 magnets

- 15mm and 20mm radius: has space for 4 magnets

How to print: Print it flat on the bed. You need to use "pause at height" in your slicer right before it prints the top over the magnet holes. Drop your magnets in, and then resume the print.

I recommend using the variable layer height for this model!

Can also be used as a regular fridge magnet.