Black Sabbath Name Logo

Pay homage to the pioneers of doom and heavy metal! This 3D wall display plaque captures the iconic, wavy stacked typography of Black Sabbath —featuring a offset perimeter border that gives the heavy 3D letters a sharp, floating outline effect.

This model is part of my Slave To The Metal 90s Drawing Series /Collection , where I am systematically turning my original hand-drawn concept art of classic band logos into clean, printable display pieces.

Easy Multi-Color Printing:

The underlying backing border is set to a 0.125” thickness while the main lettering steps up to 0.375” (0.5" overall depth). This layered depth allows for an effortless z-height filament swap in your slicer to create high-contrast color combos (like classic purple text over a black offset border)!

Dimensions

- Border Width: 8.255”

- Border Height: 4.19”

- Border Thickness: 0.125”

- Text Width: 8.0”

- Text Height: 4.0”

- Text Thickness: 0.375”

- Total Thickness: 0.5”

- Mounting: Features (2) built-in keyhole slots on the back designed for #3 screws or small finish nails for a completely flush wall mount.

Print Settings

- Material: PLA

- Layer Height: 0.12mm to 0.20mm (Lower layer heights yield incredibly smooth results across the blocky angles and curves of the letters).

- Infill: 10% or higher (Gyroid or Grid patterns work great).

- Supports: None required when printed flat on the bed.

Looking for the cross version?

Check out my companion listing here:

Where It All Began:

Curious about the original hand-drawn concept art that inspired this whole series? Check out the model that started it all: