Decontaminator Purge Bucket & Nozzle Scrubber - remix for A1 Silicon Brush and 3mm screws

I wanted to be able to use a Cartographer for the z-probe on my Voron v2.4, but liked the source nozzle scrubber and sheet stops from edwardyeeks. I updated this mod to use a Bambu A1 silicon nozzle brush, and M3x12 SHCS for the sheet stops.

ABS or better is required as this sits less than 1mm from the bed.

BOM (changes only):

- 3x M3x12 SHCS

- A1 Silicon Brush - I used these: https://a.co/d/05YeJoUU

The macros and purge buckets are available at the linked original source.