3D-модель · Printables

D2143D8UM - S4P2143 CPU Fan Shrouds (80mm & 60mm)

Площадка: Printables
Цена: Бесплатно
Лицензия: уточняйте на площадке; Условия задаёт автор — проверьте их на странице модели, прежде чем печатать на продажу.
Форматы: 3MF

1 Лайки
0 Загрузки
0 Напечатали
0 Комментарии
21 Просмотры

Автор:carterlabs

Опубликована 21.09.2026

Скачать на

Printables

Описание

A quick fan shroud IU made for the Asrock D2143D8UM / Datto S4P2143.

There are 2 models included. One is for an 80mm fan, the other is for a 60mm fan. The body of both shrouds is the same, it's just the fan mounting that is different.

It's designed to clip to the stock heatsink.

With an Noctua 80mm fan (NF-A8 PWM) running at 100%, on an open air test bench, CPU tops out in the low 70C @ an ambient of 22C.

Recommend printing from something with good heat durability / glass transition temp; e.g. PETG / ASA / ABS. Might get away with some of the HT filaments as well.

I have not tested the 60mm version.