FGC-68 tipx edition: TMC lower

----------------

the parts list and the documentation to get started can be found here the link to the new manuals can be found here

https://drive.google.com/drive/folders/1cR-nfubPEXCrr6-0PsUFC_jSHIq18V4U?usp=sharing

---------------

11-10-2024 M5 nut lower have been added. for a stronger connection

it will use a 30mm long M5 bolt with 3d printed grips -------

FGC68 GEN2 Updarted

the link to the new manuals and parts list can be found here https://drive.google.com/drive/folders/1POafTye0p9ps3qhr2-nWT2uAPL3kko1u?usp=sharing

____________________________

this lower will work with the basic FGC68 upper and parts. but this lower will make it possible to shoot with your TMC mags for a higher round count.

the starter set can be found here: https://www.printables.com/model/87803-fgc-68-base-package-starter-set-for-tipx-tcr-magfe

the collection of FGC68 parts can be found here: FGC68 MKII https://www.printables.com/social/180009-untangleworks/collections/88908

FGC68 MKI https://www.printables.com/social/180009-untangleworks/collections/88907

a video about this lower will be made later:

the ABD installation video can be found here: https://www.youtube.com/watch?v=5IxGVSHOZ00&t=3s

some of the installation steps that are different from the TIPX lower can be fund in the images for now

parts needed for mag catch. 1x spring 6mm OD, 0.5mm wire, 20mm long 1x m3 bolt in a length of 30mm 1x m3 washer 1x metal pin 4mm OD, 27mm long (a 3d printed part can be used for this)