POLYZON
Tamiya Blitzer-Monster Beetle/Sand Scorcher rear window louvre - Thickened with locator pins and TPU attachment
Tamiya Blitzer-Monster Beetle/Sand Scorcher rear window louvre - Thickened with locator pins and TPU attachment — Фото 2 из 5
Tamiya Blitzer-Monster Beetle/Sand Scorcher rear window louvre - Thickened with locator pins and TPU attachment — Фото 3 из 5
Tamiya Blitzer-Monster Beetle/Sand Scorcher rear window louvre - Thickened with locator pins and TPU attachment — Фото 4 из 5
Tamiya Blitzer-Monster Beetle/Sand Scorcher rear window louvre - Thickened with locator pins and TPU attachment — Фото 5 из 5
3D-модель · Printables

Tamiya Blitzer-Monster Beetle/Sand Scorcher rear window louvre - Thickened with locator pins and TPU attachment

Сведения о модели

Площадка
Printables
Цена
Бесплатно
Лицензия
CC-BY-NC
Можно печатать и изменять для себя с указанием автора; продавать модель и отпечатки нельзя.
Форматы
STL
  • 26 Лайки
  • 316 Загрузки
  • 0 Напечатали
  • 0 Комментарии
  • 2 231 Просмотры

Автор:ziddan

Опубликована

Скачать на Printables

Описание

UPDATE: Added another brace that prints and works well with the flex in PLA, clips in very nicely.

Looks about the same from the outside but the original didnt print well for me so i thickened the insides of the slats, added locator pins and made a mount that when printed in TPU allows for a friction fit but is still easy to remove.

The mount might work in PLA as well but then it would need the 3mm screw to be removed.

Mine was printed with build plate only tree supports.

Big Thanks to the originator!

To mount an unmodified Sand Scorcher body on a TT02B, as pictured, see here: https://www.thingiverse.com/thing:5329564

Category: R/C Vehicles

Теги

thingiversetamiyablitzerbeetlemonsterbeetlesandscorcher
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.