FGC9-MKIISD UNW227 SLIM shroud

I have updated it to a V2 model this will add 1 extra bolt hole so the rail is stronger

--

these MKIISD shroud models will work on the MKII platform. but it haves some upgrades from the FGC9SD. what does the MKIISD update mean?

the main update and why these are called MKIISD are that I took some improvements from the FGC9 SD and placed in the MKII shroud models that I designed. but keep in mind the are still made to just work with the MKII this is because the rail stands higher then the SD does.

so the magnet design of the MKII have been removed. and the SD style magnet have been added. the to install it is basically the same. but you will be using a cylindrical magnet with a OD of 5mm and 10mm long in size.

and wile I’m add it did I also add the grove that prevents the barrel from rotating

--

for this slim model did I remove the option for the bolt on rail but you will have the option for the normal light or the UNW low rail hight.

the low rail upper can be fount here. https://www.printables.com/model/200869-fgc9mkiisd-no-sling-mount-upper-with-fixed-low-rai

the name 227 stands for the barrel length this is made for. but this is the same length as what

was called the M shrouds in the past like the: 2021 LB short, AK shroud, TEC9 M, LB short.

this set will also include a special mandril custom made for me by ImmortalRevolt that can be used with the ECM v3 set that can be found here. https://odysee.com/@c0ld_d8rk_h8nd:8/ECM-Barrels-v3.5:e