Ikea Bror Plexi Holder Remix 4mm

I didn't need a fully enclosed cabinet but I wanted to use 3mm plexiglass. I remixed the fusion file from oa1 and gave the holder a 4mm width. This keeps the plexi secure but also allows you to slide it out easily if you need to clean or work on the printer.

I also widened the screw holes to make it a little beefier. #10 metric screw head fits flush.

Print Settings

Printer Brand:

Prusa

Printer: I3 MK3S

Rafts:

No

Supports: No

Resolution:

.2

Infill: 20

Filament: Overture PETG Black

Notes:

I did print these with the gap facing sideways and 1mm brim when using the PC sheet.

Post-Printing =============

Category: DIY