Enclosure spool holder - complete

Printable accessory developed specifically to enable you insert more spools into your Original Prusa Enclosure.

In case you have the injection moulded part delivered with your Original Prusa MK3S+ printer, check the alternate version: Enclosure spool holder - base .

There is a left and right version of the spool holder - complete.

To mount the spool holder - complete you will need the following fasteners*:

- M3x8 screw (2x) * The package of the Original Prusa Enclosure includes extra fasteners, which were added in case you need a second spool holder :)

Print instructions

You have two options:

- use the pre-sliced G-code and print it on your MK3S+ - download the latest PrusaSlicer and use the following settings**: - print settings: 0.30mm DRAFT - filament: PETG (tested on Prusament) - 15% grid infill ** Note that print settings are recommended, but you can experiment with your own.