Voron StealthBurner CR Touch Mod for Switchwire (Tool Less)

This repo contains the STL for Voron SW SB CR Touch Mod.

I used the SB 1.05Beta during development. But it should work on the SB v1 release as its only X rail carraige.

- The STL is only for MGN12 Carraige for SW - No supports are needed during the print - No tools are needed to fit the CR Touch, its a press fit - I used Dragon Standard hotend for deciding height of CR touch and its 2mm above the nozzle when pin is up - It should work with other hotends as well (Hotends of same form factor as Dragon) If the STL helps, do star my repo: https://github.com/prasadp4009/SW_SB_CRTouch