BiQu H2 (V2,V2S) fanduct for single / dual 5015 Fan - standart / volcano heatblock

BiQu H2 fanduct for a single 5015 fan

Parts Needed:

- 2x M2.5 x 6 countersunk screws - 2x M3 Nuts - 2x M3 x 24 screws Printsettings:

- Layerhight: < 0.15mm - Support Needed

BiQu H2 fanduct for a Dual 5015 fan

Parts Needed:

- 2x M2.5 x 6 countersunk screws - 2x M3 Nuts - 2x M3 x 20 screws - 2x M3 x 24 screws Printsettings:

- Layerhight: < 0.15mm - Support Needed

Recommended printing in ASA/ABS or other temperature resistant filaments like PC

Assembly tips:

- Mount the fanduct to the H2 with the M2.5x6 countersunk screws - Mount the fans to the duct with the M3x20 and M3x24 screws and M3 nuts

Testprints:

The BENCHY was printed with eSUN Silk PLA in 40 min @

- FanSpeed: 100% - Layer High: 0,2 The Overhang test was printed with eSUN PLA+ in 18min @ FanSpeed 100%.

- FanSpeed: 100% - Layer High: 0,15