Pool skimmer holder/clamp (intex/bestway)

Better holder for intex/bestway skimmer (same shaft dimensions as original intex skimmer). Or you can use it for my iteration of pool skimmer

Printed with 0.6mm nozzle.

How to print:

toppart.stl, bolt.stl:

- PLA - 0.25mm layer (for better thread detail) - 2perimeters - 25% infill - no supports or brim bottompart.stl, hole_plug_3x.stl:

- PLA - 0.3mm layer - 2perimeters - 25% infill - no supports, add brim shaft.stl:

- PLA - 0.3mm layer - 3perimeters - 30% infill - no supports or brim - print as long as your printbed allow / cut in slicer when needed. Assembly:

Slide shaft to the top part, secure with bolt, attach to the pool metal frame, use some wood or metal screws to secure bottompart with toppart. There is groove in the bottompart for ziptie - ziptie it to the metal leg.