Prusa lubricant LM8UU adaptor (Bearing pacifier)

Simple tool for lubricating LM8UU bearings.

Print instructions

New version! We found a few things we could improve, so we did, as we always do :-)

Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn it counterclockwise until you feel a slight resistance. Then press the tube and watch the tip of the tool for grease leak. Once the grease starts leaking, the bearing is lubricated sufficiently. By my experience one tube is sufficient for two sets of bearings.

Version for Mogul LV 2 EP 100ml tube by Petr Jezek https://www.thingiverse.com/thing:4401567

New Prusa lubricant LM10LUU adaptor (for MK4)

Also, you can buy me a cofee ;-)