Bambu Lab P1P full printable enclosure mod (P1X)

This is probably the first fully printable case mod for the P1P (maybe).

Important Update: 23.01.2023.

Printing these Files is complicated. ABS/ASA/PETG all failed because of Warping, the parts are to thin and large. Even with my X1C i had no success. PLA is not a reliable Material because of the temps inside the enclosure. I don't think this project will work out. You can use the Remix made by Hobo4ssassin for the Side panles (Hinges for the door missing).

https://www.printables.com/model/365821-p1p-enclosed-sides-armor-modplate

But I cannot guarantee success if you start this project. Consider it as BETA.

- Print in ABS/ASA (Because of temps inside the enclosure) - Infill 15-20% (Bolts for the door 100%) - Supports

Part Fix Date

Door bolt Reduced door bolt size 0,1mm 13.12.2022

Added ptfe tube bracket made by @ thrutheframe 19.12.2022

P1P_SidePanelLeft_SidePanelLeftTopV1.1 Uploaded correct file. Fixed size for backplate 04.01.2023

P1P_SidePanelRight_R_SidePanelRightTopV1.1 Fixed size for backplate 04.01.2023

P1P_BackPlateV1.1 fixed size and thickness 04.01.2023

Complete Rework

Part Fix Date

Right Side Panels Complete Rework 09.01.2023

Left Side Panels Complete Rework 09.01.2023

Door Complete Rework 09.01.2023

Back Panel Complete Rework 09.01.2023

Added STEP File 09.01.2023

Left Middle Top Panel Fixed Srew insert position thx @ Hobo4ssassin 10.01.2023

L & R Middle 0,5mm longer each 24.01.2023

Folder Backplate & LR_BackSideCorner + 5mm longer 28.01.2023