Raspberry 3 A+ Case for Prusa i3 MK3/S with camera cable slot.

This is a remix of the original design of Jonlynn (link at the end). I took his designed and add a slot for the Pi Camera and a perpendicular arm that fits the Prusa i3 Frame.

Print instructions

This is a remix of the original design of Jonlynn. I took his designed and add a slot for the Pi Camera and a perpendicular arm that fits the Prusa i3 Frame.

Printed in PETG.

You will need 2x M3x10mm screw to attached the case to the frame. I highly recommend this M screw nuts set from Aliexpress. Is very useful for a lot of different projects.

https://www.aliexpress.com/item/480pcs-New-Hex-Socket-Screws-M2-M3-M4-Stainless-Steel-Head-Cap-Screw-Nut-Set-With/32816555979.html?spm=a2g0s.9042311.0.0.27424c4dbqOy15

So far, Octopi is running great on the Raspberry Pi 3A+. I connected the Raspi to the printer using a short Usb cable that I bought in Aliexpress.

https://www.aliexpress.com/item/Anti-interference-high-quality-short-20cm-A-Male-to-B-Male-USB2-0-Printer-Cable-Line/32809052856.html?spm=a2g0s.9042311.0.0.27424c4dUd23cc

I do recommend to buy the original Raspberry power supply of 5V 2.5A. I tried to use other PSU for this and I had always the power alert on Octopi. If you are going to modified the cable for the power be sure to use a 18AWG cable, not less.

https://www.aliexpress.com/item/Official-Raspberry-Pi-Universal-Power-Supply-Interchangeable-heads/32806827449.html?spm=2114.search0104.3.130.28b819543B2VMR&ws_ab_test=searchweb0_0,searchweb201602_10_10065_10068_10547_319_10059_10884_317_10548_10887_10696_321_322_10084_453_10083_454_10103_10618_10307_537_536,searchweb201603_52,ppcSwitch_0&algo_expid=592bb47a-f433-43c1-82e4-a7fce2ed6f96-18&algo_pvid=592bb47a-f433-43c1-82e4-a7fce2ed6f96

Original Design by Jonlynn:

https://www.thingiverse.com/thing:3244526

Thingiverse link:

https://www.thingiverse.com/thing:3665164