Lucky 13 skin: Orc Warrior

This started out as just a set of armor but when I realized it looked a lot like gear from WoW, I decided to lean into it and made the axe based on Gorehowl.

LUCKY 13 PIECES NEEDED

On top of downloading my files, you will need to download most of the armature and some of the skin from the original Lucky 13 model. All of the following pieces should be printed in green.

If there is a [2X] , [6x] or [12x] in the title, that means you need two, six or twelve of that piece. Those amounts are what you will need to make a full set of armor. That goes for both the files that I've uploaded as well as the Lucky 13 pieces I'm linking to below.

00A01 armature head.stl 00A02 armature neck.stl 00A03 armature chest.stl 00A04 armature abdomen.stl 00A05 armature waist.stl 00A06 armature hips.stl 00A08 [2X] armature shoulder.stl 00A09L armature upper arm left.stl 00A09R armature upper arm right.stl 00A10L [2X] armature forearm left.stl 00A10R [2X] armature forearm right.stl 00A11 [2X] armature glute.stl 00A12 [2X] armature thigh.stl 00A14 [2X] armature shin.stl 00A15L armature foot left.stl 00A15R armature foot right.stl

00B01 skin head.stl 00B02 skin neck.stl 00B03 skin chest 1.stl 00B04 skin chest 2.stl 00B05 skin abdomen.stl 00B11 [2X] skin glute.stl 00B12 [2X] skin thigh 1.stl 00B13 [2X] skin thigh 2.stl

HANDS

It doesn't matter what style of hands you use but they should be printed in green. The following list are the basic hands originally released with the Lucky 13 model however there are lots of different hands out there, you just have to search for them.

00A17L armature hand flat left.stl 00A17R armature hand flat right.stl

00A19R armature hand dynamic right.stl 00A19L armature hand dynamic left.stl

00A21R armature hand grip right.stl 00A21L armature hand grip left.stl

00A18L armature hand neutral left.stl 00A18R armature hand neutral right.stl

00A20L armature hand fist left.stl 00A20R armature hand fist right.stl

If you want to use the axe, you will need the Detailed Simple Grip hands made by Printables user Cromulent .

ASSEMBLY

Assembly shouldn't be too difficult.

First, assemble the L13 parts listed above the same way you would normally using my remixed clavicle and knee parts. If you're not familiar with Lucky 13 assembly, check out the Lucky 13 manual .

WRIST

Pieces you will need:

- Wrist 1 - Grey.stl

- Wrist 2 - Grey.stl

- Wrist 1 Plate - Red.stl

- Wrist 2 Plate - Red.stl

- Large Spike - White.stl

- Medium Spike - White.stl

Fit the red wrist plates into the grey wrist pieces and then fit the spikes into Wrist 1 - Grey.stl as seen in the photo below. The completed Wrist 1 - Grey.stl and Wrist 2 - Grey.stl then snap together over the forearm armature.

UPPER ARM

Pieces you will need:

- Left Upper Arm - Grey.stl

- Right Upper Arm - Grey.stl

- Right Upper Plate - Red.stl

- Left Upper Plate - Red.stl

- Small Spike - White.stl

Super easy to assemble just like the wrist. The red plate and the spike fit into the grey piece. The completed upper arm skin then slides onto the upper arm armature as seen in the following picture.

SHOULDER

Pieces you will need:

- Shoulder - Grey.stl

- Shoulder Plate 1 - Red.stl

- Shoulder Plate 2 - Red.stl

- Large Spike - White.stl