[Euro Pegboard] Bosch Professional 12 V Tool Holder

Simple Bosch Professional 12 V tool holder that slides in the battery compartment.

You will also need 2 M5x6 SHCS.

Optionally, you can add a M5 40 mm screw in the backside as reinforcement. With PLA it shouldn't be necessary but i think with ABS it might. Didn't tested it with ABS, though.

Screw the screws in the holes on the back side. Adjust the depth of the screws so that the friction with the pegboard is just right (= good amount of friction but moveable).

Cad files are attached. Feel free to remix.