Gridfinity Window Bins - 2x Tall, 2x Deep

Version of the Gridfinity window bins modified to:

- Not require any tape, slides are held in place via rails and caps - Close the gap between the caps and the side walls - Have 2x deep versions - Have 2x tall (2 stacked microscope slides) versions Caps stay in place decently, but a little superglue on the seam will lock it in. Included a tall cap if you don't want to use two slides for the tall bins.

For reference, the slides I've used are 25mm x 75mm x 1mm. That should be standard, but obviously variances occur.

Combined .step & f3d file for your remixing pleasure or if you want to chase tolerances.

Edit 2/22/23: Turns out the slides I have were a bit off of the standard size. Uploaded new models of the caps to hopefully allow more vertical clearance.