P1P Standard Drag Chain Mount Remix

I was looking forward to print Hobo4ssassin s drag chain for the Bambu Lab P1P but then saw, that some people have issues with sagging and the chain touching the carbon rods.

So I opted for an injection molded model from amazon instead for tighter tolerances.

https://amzn.eu/d/8SkhmvU

I then found that the mount for the chain on the PTFE pass through does not fit the chain and modified it so that it fits the injection molded chain.

I affixed it with 3 M3x6mm screws.

I am very happy with the result and hope that this helps others, who don't want to print the drag chain themselves, but like the idea of having one.

Update 05.02.2023 :

I added Hobo4ssassins extruder mount and PTFE tube guide, so everything needed for the injection molded chain can be found in this remix.

To affix the extruder mount, you have to remove the rear cover as in the last image.

All in all, just print the parts, buy the chain on Amazon and be happy. Please also give props to Hobo4ssassin , the original designer, by leaving a like or a review here: https://www.printables.com/model/368584-p1p-printable-cable-chain/files