Ferrite mount for Prusa i3 MK3S+ LCD ribbon cable

I was getting a wacked out display during the Setup Wizard on my MK3S printer. Thought I'd try adding a ferrite around the LCD cable to see if it went away. It did.

Used OpenSCAD to design a simple mount to hold a ferrite on the ribbon cable to the LCD on my MK3S+ . I use a cable tie to secure the ferrite to the mount. The mount is secured to the printer frame with two T-nuts.

To secure the mount, I printed T_Nut_30x30_Prusa_M5_Nut.stl from: Drop in T-Nut for Prusa 30x30 Profiles https://www.thingiverse.com/thing:3998406