sanindusa Flush button and threaded bracket

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lrWOhGDsx8F

Enkel Drukknop houder met beugel beugel breekt heel snel.

Deze heeft een versterkte ring.

Just the plain push button holder and the bracket which breaks alot.

Included with support no support needed.

Best printed in PETG because the bracket wil be constant in contact with moist.

Printed with 0.5 nozzle and 0.2 layer height. 25mm p/s duration print 2h20min

Please if you like the model and planned to make it please post a

make https://www.thingiverse.com/thing:2798420/make

I would appreciate a nice cup of coffee during modeling and it helps me a lot by supporting me. https://www.paypal.me/Vanvoorn

Supporters will be listed in the summary of every model i make.

Print instructions

Category: 3D Printing Summary

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lrWOhGDsx8F

Enkel Drukknop houder met beugel beugel breekt heel snel.

Deze heeft een versterkte ring.

Just the plain push button holder and the bracket which breaks alot.

Included with support no support needed.

Best printed in PETG because the bracket wil be constant in contact with moist.

Printed with 0.5 nozzle and 0.2 layer height. 25mm p/s duration print 2h20min

Please if you like the model and planned to make it please post a

make https://www.thingiverse.com/thing:2798420/make

I would appreciate a nice cup of coffee during modeling and it helps me a lot by supporting me. https://www.paypal.me/Vanvoorn

Supporters will be listed in the summary of every model i make.

Print Settings

Printer Brand: Prusa

Printer: Prusa Clone

Rafts: No

Supports: No

Resolution: 0.2

Infill: 10%

Notes:

3 perimeters

How I Designed This

Designed it in Tinkercad with a support clearance of 0.6mm

Should be coming off fairly easy.

Custom Section