Bambu Lab AMS Silica Pod for Xiaomi Mija Hygrometer

Bambu Lab AMS Silica Pod for Xiaomi Mija Hygrometer — Фото 2 из 8

Bambu Lab AMS Silica Pod for Xiaomi Mija Hygrometer — Фото 3 из 8

Bambu Lab AMS Silica Pod for Xiaomi Mija Hygrometer — Фото 4 из 8

Bambu Lab AMS Silica Pod for Xiaomi Mija Hygrometer — Фото 5 из 8

Bambu Lab AMS Silica Pod for Xiaomi Mija Hygrometer — Фото 6 из 8

Bambu Lab AMS Silica Pod for Xiaomi Mija Hygrometer — Фото 7 из 8

3D-модель · Printables

Bambu Lab AMS Silica Pod for Xiaomi Mija Hygrometer

Площадка: Printables
Цена: Бесплатно
Лицензия: CC-BY-NC-SA; Только некоммерческое использование с указанием автора; переделки — под той же лицензией.
Форматы: 3MF

93 Лайки
631 Загрузки
14 Напечатали
33 Комментарии
3 218 Просмотры

Эта модель на других площадках

MakerWorld

Автор:Peter

Опубликована 12.04.2023

Скачать на

Printables

Описание

WHY?

The existing AMS dryer pods by STprinting are great for the outsides. For the middle slot, I needed something to fit my Xiaomi Mija Hygrometer , of which I had a couple lying around.

UPDATE v2

Based on your feedback, I strengthened the grid underneath the hygrometer.

DESIGN

I remixed STprinting's design, but kept the overall dimensions. To make the hygrometer stick, I closed a couple of gaps to attach double sided tape. The whole pod still prints without supports.

SETTINGS

I used PLA with 0.16mm layer height. Make sure to Z-hop properly to avoid the fragile columns to break off. Here are my detailed settings:

- 0.8mm retraction length - 0.4mm Z hop when retracting - Spiral type - 30mm/s retraction speed - Activate “retract on layer change” - Activate “Avoid crossing walls”

ADDITIONAL MATERIAL

A Xiaomi Mija Hygrometer and some double sided tape like this M3 tape (affiliate links).