Skadis T-Nut Usb, SD card and MicroSD card holder

HOW TO:

First of all, thank you for downloading my model :D

So you will need T-Nuts Mounting System made by @6d6178 .

When you got the t-nuts printed with or without optional adapters you need to slot the screws into holes and then loosely screw M2/M2,5 screws (i used m2,5x20 but you can do it with shorter ones). Then you just slot in the contraption and screw it in (you will need longer screwdriver/hex wrench and bit type screwdriver won't work as its too wide).

Print settings:

- Speed: any (depends on printer) - Infill: 10-100% - Number of walls: 3-infinite If you wish you can donate on my ko-fi page .