ZeroPanels For Voron V0.2

This Remix modifies ZeroPanels to perfectly fit a Voron V0. bringing snap-on side panels to the V0.

This has been made with 2mm panels in mind

if you have 3mm panels you can either use the STLs provided without foam or use the CAD to export the STLs, a 3mm CAD is provided but most likely unsupported as i dont have 3mm panels

The models are made to try to keep the external dimensions of the V0.2 as close as possible, the resulting thickness of the snap-on panel clips should be no more than a few mm thicker than the stock screw-mounted clips, VBH tape can be omitted on all but the door.

The models also include support for the Voron V0.2 1515 extrusion tophat.

only the tophat hinge requires screwes due to the weight

Required Parts:

https://www.amazon.co.uk/gp/product/B0BFQVFNQD 1.5mm thick foam

https://www.amazon.co.uk/gp/product/B08LBZ8KGL 6.35mm wide vhb tape

ATTRIBUTION:

Thanks to zruncho3d, Grizzle357, sorkyl, Floaf, falo, SuperPringles, burningBeard, Ax4x Se7en, John, Kosh42EFG, schwaded, Bacon, chadonka