Honeycomb Wall Holder - Micrometer + CR2032 Battery

Holder for micrometer caliper with slot for CR2032 battery. The micrometer is held at slight angle to keep device taut.

Following STL's provided

Body depth of 22mm and top arm depth of 8mm

- HexMicrometerHolder_30mm (as pictured for the featured micrometer) - HexMicrometerHolder_35mm (slightly larger width, for other models) Let me know if your particular micrometer doesn't fit, I'm hoping angle approach will allow for a variety of models to be used.

Relies on the “insert-empty” hex part (or similar x2 x4 joiner parts) used in the HoneyComb Wall. Further types of insert-empty can be found here (reduced friction) and here (rotated position).

Hex insert peg designed with flex in mind so that holder can be inserted without requiring much force to insert or remove from wall.

Print without need for supports, the hex insert is flat to the print bed.

Printed at .20mm layer height using PLA