Morrigan Aftermarket parts by Black Cow

Morrigan's Aftermarket parts: Prefix part numbers. Example : All parts starting with A will be Wide Wheels

A- 46mm Wide Wheels for 60mm wide AG tires. (over all makes model 14mm wider) 3mm inward and 7mm outward from original wheels. Works with all Morrigan axles.

A3Wide Hub For 3mm extra tire clearance. Use only if tire rubs

A5Wide Hub For 5mm extra tire clearance. Use only if tire rubs

B- IN SET- Works with rear non steer axle only 46mm Wide Wheels for 60mm wide AG tires. ( The offset of the wider tire is pushed 10mm inward. ) If using normal tires in front and AG in back the width is same front and back.

CA- Passenger side dash plain

CB- Passenger side dash Chevy symbol

CC- Passenger side dash JokeR and jester hat

E- Axle Centers. Use these to make the pinion gears tighter. (tighter as marked)

G- Spindles with steering pivot 3x6x2.5 bearing ( need four 3x6x2.5 bearings per axle - and swap the M3 x 10mm screws to M3 x 12mm screws)

H- Spindles with “02101 Steering Plate C-Hub Bushing Sleeves Redcat HSP” pivot (need four bushings per axle - and swap the M3 x 10mm screws to M3 x 14mm screws)

J- Axles Plus- 0.2mm slightly over sized bearing holes. (Looser fit)

K- Axles Plus- 0.4mm slightly over sized bearing holes. (Looser fit)

L- Front Axles with tubes for Derby weights or 9mm copper coated lead weights. weights are 1back, 2front and 3front and back

M- 001 Front -540 Motor option NOT TESTED Feedback appreciated (Motor plate adaptors at bottom of Transmission Shop)