spiggytech 3060/3060TI Single Fan Conversion Shroud to Slim 92mm Noctua Fan Mod

This project is in alpha testing. As such, it may have goofs and slight fitment gaps. I'm working on that as I acquire another GPU to test the fitting. Your feedback is highly valued in this stage

Update 7/22/2023: Added a new assembly labeled “Classic” that has a patterned face plate design cue. The border is a separate piece to the face plate. But still retains meshed edges. Moving forward, I will also be revising the first “Vision” design as well as working on an integral 95mm and 100mm variety.

Hello!

Enclosed is a modification to the 30-series single fan GPU. It was tested on the following platform: PNY 3060 single fan & PNY 3060 TI with a Manli heatsink

In theory it should fit this type of heatsink.

The front gap is open for a slim 92mm fan for your favorite fan. You may also need a JST PH2.0 plug to convert the fan to PCB

Print in PETG+ or higher temp tolerant material (eg. ASA or ABS)

Vent pieces can be printed at 2 wall perimeter, 0 layer top & bottom, 30% honeycomb for that vent mesh look.