HueForge Spider-Man with mechanical arms

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA PolyLite Wine Red Transmission Distance: 1 PLA PolyLite Azure Blue Transmission Distance: 1 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PETG JAYO White Transmission Distance: 6

Swap Instructions: Black until layer #7 at 0.64mm Wine Red until layer #9 at 0.8mm Azure Blue until layer #12 at 1.04mm Sunrise Orange until layer #16 at 1.36mm White for the rest.