V6 Nozzle Box

I really liked Wusaweki's nozzle tray with the hexagonal springs but I wanted a box with a lid and labels so I remixed the design into a more traditional nozzle box.

The box has 10 slots each for 0.4mm, 0.6mm, and 0.8mm nozzles with half of them marked for hardened steel. I can never remember the E3D dot codes so I added that to the box as well.

Eight 3x6 magnets are needed for the lid.

There are 2 versions, one with a lip which can be a tight fit if your printer tolerances are not good and one that is a flush fit with a chamfered edge.