Minimalist Screen Bezel for Bambu Lab P1P / P1S

These are two simple bezels for the Bambu Lab P1P / P1S screen. Choose what you prefer.

The bezels are optimzed to be printed with the standard 0.16 “optimal” system setting, no support or brim needed. They will be pressed on the screen from the front and clip to the screen on the backside. Yes, it is a tight fit - if it is too tight for you then you can scale the model with the slicer in z-direction by +0.1 or +0.2% and print again.

Disclaimer: This work by blecheimer is licensed under CC BY-NC-SA 4.0 You are not allowed to copy this model to other 3D printing websites without my permission.