"Not The Benchy" in a bottle (MC)

If you have no ideas, transform the work of others. And I really had no idea for a while. At least not a single one that turned out into something usable.

So I've redrawn the Benchy (kind of) and put it in a bottle.First it looked like and impossible print, but it might be very possible to print this without a cut.

This thing is currently "Work in progress". I've checked clearances and did some test in the slicer but I haven't printed it yet.

You can find the single color version here: https://www.prusaprinters.org/prints/57002-not-the-benchy-in-a-bottle

Update: -------------------------------------------------------------------------------------------------------- 2021/03/02: Easier printable version of the bottle added

Print instructions

Print Settings

Resolution:

0.2mm

Infill:

doesn't matter

</div>

Notes:

- Only the liquid needs infill - If you want to avoid a seam on the bottle you might want to use the "2 part liquid". - Print the liquid and "not the benchy" first. - Print the bottle in vase mode and pause the print if it's higher than the liquid + "not the benchy" - Glue in the liquid and the benchy as long as it's still on the print bed - Continue the vase mode print. insert the liquid and the "NotTheBenchy".