Voron - BTT SB2240/SB2209 CAN Bus with PG7 Cable Gland Mount

Voron - BTT SB2240/SB2209 CAN Bus with PG7 Cable Gland Mount — Фото 2 из 9

Voron - BTT SB2240/SB2209 CAN Bus with PG7 Cable Gland Mount — Фото 3 из 9

Voron - BTT SB2240/SB2209 CAN Bus with PG7 Cable Gland Mount — Фото 4 из 9

Voron - BTT SB2240/SB2209 CAN Bus with PG7 Cable Gland Mount — Фото 5 из 9

Voron - BTT SB2240/SB2209 CAN Bus with PG7 Cable Gland Mount — Фото 6 из 9

Voron - BTT SB2240/SB2209 CAN Bus with PG7 Cable Gland Mount — Фото 7 из 9

Voron - BTT SB2240/SB2209 CAN Bus with PG7 Cable Gland Mount — Фото 8 из 9

3D-модель · Printables

Voron - BTT SB2240/SB2209 CAN Bus with PG7 Cable Gland Mount

Площадка: Printables
Цена: Бесплатно
Лицензия: CC-BY; Можно печатать, изменять и использовать в коммерции — с указанием автора.
Форматы: STLSTEP

104 Лайки
654 Загрузки
2 Напечатали
7 Комментарии
4 284 Просмотры

Автор:3DXman

Опубликована 13.09.2023

Скачать на

Printables

Описание

A 2 parts mount for people using BTT SB2240/SB2209 CAN Bus board that are also using PG7 for strain relief. I didn't want a bend in my cable, so I made this from scratch.

Note: I do not use a cable cover (didn't want extra weight) so the existing ones probably will not fit this.

I printed this using PET-CF and only used 2 walls and 15% gyroid infill to save some weight. Only around 11g.

You will also need the follow:

- 3 standard 3mm insert that Voron builds already used - 2 m3x8 or m3x12 for the clamp - PG7 cable gland (https://www.amazon.com/gp/product/B07DH9QNCM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) On the other end of this cable, I have a CNLINKO LP-12 connector. If there are interest, I can upload that as well.

Step files are included, so mod away!