HueForge Goomba [Multicolor]

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Brown Transmission Distance: 0.5 PLA PolyTerra Lava Red Transmission Distance: 1 PLA PolyTerra Army Beige Transmission Distance: 0.5 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA PolyLite White Transmission Distance: 5

Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Brown At layer #21 (1.76mm) swap to Lava Red At layer #46 (3.76mm) swap to Army Beige At layer #52 (4.24mm) swap to Savannah Yellow At layer #68 (5.52mm) swap to White for the rest.