HueForge Charmeleon [Multicolor]

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Azure Blue Transmission Distance: 3 PLA BambuLab Tough Vermilion Red Transmission Distance: 3 PLA BambuLab Tough Vermilion Red Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 PLA Kexcelled Fluorescent Orange Transmission Distance: 6.5 PLA PolyTerra Sakura Pink Transmission Distance: 2.8 PLA PolyLite White Transmission Distance: 5

Swap Instructions: Start with Black At layer #21 (1.76mm) swap to Azure Blue At layer #38 (3.12mm) swap to Vermilion Red At layer #40 (3.28mm) swap to Vermilion Red At layer #46 (3.76mm) swap to White At layer #50 (4.08mm) swap to Fluorescent Orange At layer #51 (4.16mm) swap to Sakura Pink At layer #54 (4.4mm) swap to White for the rest.