Simply Flexible Mask Covid-19

Yet another easy printable and usable mask.

=====================================================

(---- Notice ----)

Why will I not design this mask for printing in PLA or PETG?!

I get quite a few requests to convert this design for printing in PLA or PETG. Sorry, but I am not going to do that, and this is why:

In my experience, PLA and PETG are TOO DANGEROUS to put on your face. If a PLA or PETG mask cracks, especially when printed as a light weight/thin wall, it will cut your face like a knife. It may not be happen on the first day, but it will happen one day, maybe while you are talking, and it will be sudden. Thin walled PLA and PETG will fatigue much faster than TPU, being washed, dragged and pulled in daily use. Maybe something hits your mask while you are wearing it, and it splits or shatters.

Let's see poor Kevin in the following videos:

For Part 1 in PLA please go here: https://youtu.be/ErP28uP4mVI

For Part 2 in PLA please go here: https://youtu.be/LlN01EW9ORI

For Part 3 in ABS please go here : https://youtu.be/feWsPd2XUFU

For Part 4 in PET-G please go here : https://youtu.be/k-KhRx73NxU

That is why I don't want to convert this design to use PLA/PETG. It is for your safety.

=====================================================

(--- DISCLAIMER ---)

Print and use it at your own risk.

Uses up to 2mm thickness Ply Filter. Mask weight 21gram.

I made this for the community, for the time being the shortage of surgical mask, due to the outbreak of the Covid-19 virus.

Read my PROFILE page if you want to redistribute my design materials to others, for free or for commercial.

Good Luck everyone and my loves.

STL size based on 58cm head circumference. (Refer to photo of T800 for measurement)

Just scale in slicer on XY by 1/58*[your figure] .

Personally I prefer the this version Simply Flexible Mask Valvy or Flexible Mask Valvy

Welcome comments and suggestions.

Tip me a cheese burger and subscribe my YouTube Channel if you like my work.

https://paypal.me/iczfirz

https://www.youtube.com/c/iczfirz

Addiction to 3D Printing? Watch these time-lapse!

https://youtu.be/y3-0Y90HoYo

Looking for a mask with unlimited upgrade options? Here you go The Modular System - Flexible Mask Rolley https://www.thingiverse.com/thing:4280201

Need a Goggles, please check https://www.thingiverse.com/thing:4317517

If you have 3M Half Facepiece, please check https://www.thingiverse.com/thing:4264152

If you have Ambu Mask / BVM, please check https://www.thingiverse.com/thing:4260234

Looking for 3d printed air purifier device? Here you go the >> [Deckman]

Print Settings

Printer:

Bed Size 150x150 and up

Rafts:

No

Supports:

No