DMT 6" Diamond Whetstones & Holder Box

The box is based on my parametric “ Rugged Box ” and holds up to three DMT 6" diamond whetstones and the holder you can find here: https://www.printables.com/model/610107-dmt-6-diamond-whetstone-holder

Support my work

For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).

If you want to support my work directly, you can buy me a coffee .

If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code " @Whity " at checkout or click one of the following links (the code only works for the first order of each printer model): | CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |

Also check out my other models .

Assembly

You will need six 25mm M3 screws to assemble it.

Screws

I like these screws which have a nice round head: Allen hex socket button head screw

Or, if you want no screw head at all, which I personally like even more: Hex socket set screws

Note: I recommend the stainless steel ones. The blackened ones are oily and have to be cleaned.