Gridfinity Removable Bin Label v2 - Stackable(ish)

This is inspired by @KyleWaren Removable Gridfinity Lids (Lidfinity) . I wanted a removable label that would fit in Storage Box by Pred . Label height is 12.9mm. I would assume 12mm label should work. Bins I used to model from is Gridfinity Plain Bin

Printed in ABS

Printed on Bambu Labs X1C

Settings No Brim, 0.24 Draft, 40% infill.

I installed it by placing in bin an pulling up until you hear a snap.