Rollers for (Un)original Prusa Drybox

For a complete roller, you need to print the roller_wall.stl two times and the bearing_extension.stl four times. Additionally, you will need 4 608zz bearings.

Simply put the bearings on the shafts of the roller walls and attach the bearing extensions onto the bearings. Then slide the assembled parts onto the rails of the (Un)original Prusa Drybox ss shown in the photos.

I can use six spools of filament in the drybox with my rollers without any problems.

If you want to print my model, pay attention to the orientation of the bearing extension.