Grease / lube injector with cap for LM8UU / LM8 / LBBR (8mm) and LM10UU / LM10 (10mm) linear bearings

After producing quite a mess while trying to grease my bearings, I quickly designed this injector for LM8xx and LM10xx bearings which fits on the original SKF grease tubes.

Just slide it in carfully, press and rotate the bearing - done (see attached video on https://www.youtube.com/watch?v=eEiKf8TaOOQ )

I added a cap so you can leave it on your tube

I also uploaded the step file in case you need different threads than M15x1,5

Update 18/Apr/2019:

Added

- Injector_M14x2.stl for M14x2 threaded tubes

- Injector_M14x1.5.stl for M14x1.5 threaded tubes Update 10/May/2020:

Added

- Injector_cap_lm10.stl for LMU10 bearings

- Injector_lm10_M14x1.5.stl for LMU10 bearings and tube with M14x1.5 thread

- Injector_lm10_M14x2.stl for LMU10 bearings and tube with M14x2 thread

- Injector_lm10_M15x1.5.stl for LMU10 bearings and tube with M15x1.5 thread

Category: Parts