Mercury One.1 EVA toolhead Revo-CR adapter

Allows you install a Revo-CR in the Zero-G EVA toolhead.

I'm scrapping my Ender 2 pro to use as many parts as possible on my custom 180x180 Mercury One.1 MINI build. I couldn't find an adapter to fit the Revo-CR to the EVA toolhead to I made this from the Zero-G CAD.

If you're interested in my merc mini build you can find it here:

https://discord.com/channels/747612067951018075/1161876063538905209

Print updside down using the Zero-G recommended settings.

EDIT: 1/10/24

Adjusted the hotend mounting holes so that it sits higher up and the cooling ducts align properly now. Highly recommend reprinting if you've printed the original. Cheers.

EDIT: 1/13/24

Made another revision to the placement of the mounting holes. This should be the final revision. This places the tip of the nozzle about 2-3mm below the ducts.